Hawking HW12ACM User Manual page 68

Management Protocol
SNMP Version
SNMP Get Community
SNMP Set Community
SNMP Trap
SNMP Trap Community
SNMP Trap Manager
HTTP
Internet browser HTTP protocol management interface
HTTPS
Internet browser HTTPS protocol management interface
TELNET
Client terminal with telnet protocol management interface
SSH
Client terminal with SSH protocol version 1 or 2 management interface
SNMP
Simple Network Management Protocol. SNMPv1, v2 & v3 protocol supported. SNMPv2 can be used with
community based authentication. SNMPv3 uses user-based security model (USM) architecture.
63
Check/uncheck the boxes to enable/disable specified
management interfaces (see below). When SNMP is enabled,
complete the SNMP fields below.
Select SNMP version appropriate for your SNMP manager.
Enter an SNMP Get Community name for verification with the
SNMP manager for SNMP-GET requests.
Enter an SNMP Set Community name for verification with the
SNMP manager for SNMP-SET requests.
Enable or disable SNMP Trap to notify SNMP manager of
network errors.
Enter an SNMP Trap Community name for verification with
the SNMP manager for SNMP-TRAP requests.
Specify the IP address or sever name (2-128 alphanumeric
characters) of the SNMP manager.