Hawking HW12ACM User Manual page 59

WPS
Product PIN
Push-Button WPS
WPS by PIN
WPS Status
54
Check/uncheck this box to enable/disable WPS functionality.
WPS must be disabled when using MAC-RADIUS authentication
(see 4-3-1-3-6 & 4-3-4).
Displays the WPS PIN code of the device, used for PIN code
WPS. You will be required to enter this PIN code into another
WPS device for PIN code WPS. Click "Generate PIN" to
generate a new WPS PIN code.
Click "Start" to activate WPS on the access point for
approximately 2 minutes. This has the same effect as
physically pushing the access point's WPS button.
Enter the PIN code of another WPS device and click "Start" to
attempt to establish a WPS connection for approximately 2
minutes.
WPS security status is displayed here. Click "Release" to clear
the existing status.