Table of Contents
Advertisement
5. Starting the conversion (record)
Press the / recorder control button.
The LED indicators for the and / buttons will turn ON,
the time counter shown in the centre of the LCD will begin to
increase, and the conversion will start.
Time
counter
Conversion will stop automatically when the end of the recorder
song is reached.
* The / button or F4 function button (STOP) can also be used to stop the
conversion before the end of the song.
The LED indicators for the and / buttons will turn OFF,
and the conversion will stop.
6. Selecting the save function, entering the audio file name
Press the F3 function button (SAVE).
The save audio screen will be shown in the LCD display.
Turn control knobs A and B to move the cursor position and
select the characters for the audio file name.
7. Saving the converted audio file
Press the F4 function button (EXEC).
The save confirmation screen will be shown in the LCD display.
Press the F2 button (YES) to confirm the save audio operation,
or the F3 button (NO) to return to the previous screen.
* The +/YES and –/NO buttons can also be used to confirm or cancel the
save operation.
* To prevent data loss, avoid turning the power OFF while the MP11 is saving
files to USB memory.
MP11_EN_20140421_R102.indd
85
* Conversion can also be started by pressing the F4 function button (START).
* Notes played on the keyboard will also be recorded to the audio file..
Move cursor
position
* Saved audio files are limited to a maximum name length of 18 characters.
Audio
file name
* The saved audio file will be stored in the root folder of the USB memory
device. It is not possible to store the file in a different folder.
YES: Confirm
LED indicators ON:
Recording is in progress
LED indicators OFF:
Recording has stopped
Select
character
F2 button:
F3 button:
NO: Cancel
2014/04/22
8:49:13
Advertisement
Table of Contents
