Table of Contents
Advertisement
Audio Record/Playback
7. Starting the overdub (record)
Press a key on the keyboard.
The LED indicators for the and / buttons will turn ON,
the time counter shown in the centre of the LCD will being to
increase, and overdubbing will start.
Time
counter
* Overdubbing can also be started by pressing the / button. This allows
a rest period or empty bar to be inserted at the beginning of the song.
* The metronome can be enabled before overdubbing to assist with timing
etc. When enabled, a one bar count-in will be added before overdubbing
begins.
8. Stopping and auditioning the overdub
Press the / recorder control button.
The LED indicators for the and / buttons will turn OFF,
and overdubbing will stop.
* The F4 function button (STOP) can also be used to stop overdubbing.
After a brief pause, the Audio player screen will be shown in the
LCD display.
Press the F4 function button (PLAY) to audition the overdub
before saving.
9. Selecting the save function, entering the audio file name
Press the F3 function button (SAVE).
The save audio screen will be shown in the LCD display.
Turn control knobs A and B to move the cursor position and
select the characters for the audio file name.
2
MP11_EN_20140421_R102.indd
82
(USB Memory)
* Press the and / recorder control buttons simultaneously to erase the
overdubbed audio file from memory.
Audition
overdub
Move cursor
position
* Saved audio files are limited to a maximum name length of 18 characters.
Audio
file name
* The saved audio file will be stored in the root folder of the USB memory
device. It is not possible to store the file in a different folder.
LED indicators ON:
Overdubbing is in progress
LED indicators OFF:
Recording has stopped
Select
character
2014/04/22
8:49:11
Advertisement
Table of Contents
