Kawai MP11 Owner's Manual page 75

 S electing the audio recorder input, adjusting gain level
Turn control knob C to select the desired audio recorder input.
Turn control knob D to adjust the gain level of the recorder.
Increasing the audio recorder gain level parameter may be useful
when recording quieter passages.
Audio
recorder
input
* The gain level can be set within the range of –18 dB ~ +18 dB.
3. Starting the audio recorder (standby)
Press the  recorder control button.
The LED indicator for the  button will start to flash, to indicate
that the recorder is in standby mode.
* The F4 function button (REC) can also be used to engage standby mode.
* Depending on the USB memory device connected, there may be a brief
delay before standby mode is engaged.
4. Starting the audio recorder (record)
Press a key on the keyboard.
The LED indicators for the  and / buttons will turn ON,
the time counter shown in the centre of the LCD will begin to
increase, and recording will start.
Time
counter
* Recording can also be started by pressing the / button. This allows a
rest period or empty bar to be inserted at the beginning of the song.
* The metronome can be enabled before recording to assist with timing etc.
When enabled, a one bar count-in will be added before recording begins.
MP11_EN_20140421_R102.indd 75
Input Description
All Record the keyboard sound and the LINE IN sound.
Line Record the LINE IN sound only.
Recorder
input
Audio
recorder
Gain level
Standby
mode
Recorder
gain level
LED indicator flashing:
Recorder is in standby mode
LED indicators ON:
Recording is in progress

2014/04/22 8:49:08