Kawai MP11 Owner's Manual page 25

 Amp Simulator parameters
Page Knob Parameter
A Amp Type
1 B Drive
C Level
A Amp EQ Lo
B Amp EQ Mid
2
C Amp EQ Hi
D Mid Frequency Adjusts the frequency of the amplifier's mid-range band.
A Mic Type
3 B Mic Position
C Ambience
 A djusting additional Amp Simulator parameters
Press and hold the E.PIANO sound section's AMP button, then
press the F2 button (corresponding to the selected E.PIANO
section).
The second AMP page of the EDIT menu will be shown in the
LCD display.
 arrow:
Next page
Turn the control knobs (A, B, C, D) to adjust the amp simulator's
Lo, Mid, Hi, and MidFreq EQ parameters.
Press the F2 button again.
The third AMP page of the EDIT menu will be shown in the LCD
display.
 arrow:
Next page
Turn the control knobs (A, B, C) to change the type and
positioning of the amp simulator's microphone, and adjust the
ambience parameter.
MP11_EN_20140421_R102.indd 25
Description
Changes the type of amplifier model.
Adjusts the drive level of the amplifier.
Adjusts the overall volume level of the amplifier.
Adjusts the gain of the amplifier's low frequencies.
Adjusts the gain of the amplifier's mid frequencies.
Adjusts the gain of the amplifier's high frequencies.
Changes the type of microphone used for the amplifier.
Change the position of the microphone used for the amplifier.
Adjusts the mixing ratio of additional ambient microphones.
Page 2/3
 arrow:
Previous page
Page 3/3
 arrow:
Previous page
Amp EQ Lo
Amp EQ Hi
Mic Type
Ambience
Value range
[see table above]
0 ~ 127
0 ~ 127
–10 dB ~ +10 dB
–10 dB ~ +10 dB
–10 dB ~ +10 dB
200 Hz ~ 3150 Hz
Condenser, Dynamic
OnAxis, OffAxis
0 ~ 127
Amp EQ Mid
Mid Freq.
Mic Position
2
2014/04/22 8:48:49