Kawai MP11 Owner's Manual page 39

 S electing the parameter category
After entering the EDIT Menu:
Press the CURSOR buttons to select the desired category, then
press the +/YES button to enter the selected category.
 A djusting parameters
After selecting the parameter category:
Turn the four control knobs (A, B, C, D) to adjust the parameters
assigned to those knob.
Parameters can also be adjusted by using the CURSOR buttons
to move the selection cursor, and +/YES or –/NO buttons to
increase or decrease the value of the selected parameter.
Press the EXIT button to exit the parameter category, or return
to the Play Mode screen.
Parameter adjustments made to the selected sound will be lost upon selecting another sound.
* To store the adjusted sound, use the STORE button (page 59).
 Q uick Compare function
The Quick Compare function allows any sound being adjusted to be compared 'on the fly' with the previously stored (i.e. preset) sound.
While in EDIT mode:
Press the variation button of the sound that is being adjusted.
The LED for the variation button will start to flash, and the
keyboard will play the previously stored sound.
Press the variation button again.
The LED for the variation button will stop flashing, turn ON, and
the keyboard will returning to playing the adjusted sound.
MP11_EN_20140421_R102.indd 39
Virtual
Technician
selected
Example: To enter the Virtual Technician category, press
the CURSOR button three times and the CURSOR
button once, then press the +/YES button.
Example: To compare the adjusted Studio Grand sound
with the previously stored version, press the 2nd variation
button of the PIANO section.

2014/04/22 8:48:54