Table of Contents
Advertisement
A djusting EQ parameters (cont.)
While the gain page of the EQ is shown:
Press the CURSOR button.
The frequency page of the EQ will be shown in the LCD display.
Press the CURSOR buttons to select the desired EQ
parameter, then press the +/YES or -/NO buttons to increase or
decrease the values.
Alternatively, turn the control knobs (A, B, C, D) to adjust the EQ
parameter assigned to that knob.
Press the EXIT button to return to the main playing screen.
J ump to EQ Offset shortcut
The EQ Offset is a SYSTEM parameter used to offset adjustments made by the EQ. The purpose of the EQ Offset
is to allow a 'baseline' EQ to be applied independently of the EQ function, and therefore independently of the
selected SETUP. EQ Offset must be enabled in the SYSTEM menu for this shortcut to function.
To jump to the EQ Offset screen, at any time:
Press and hold the EQ button, then press one of the F1~F4
buttons.
The EQ Offset screen will be shown in the LCD display.
The EQ Offset parameters are adjustable in the same manner as
the EQ gain parameters.
* The EQ Offset values will be added to the regular EQ values. The combined
EQ values are limited to ±10 dB.
Press the EXIT button to return to the EQ screen.
Press the EXIT button again to return to the main playing screen.
MP11_EN_20140421_R102.indd
33
Previous
page
Mid1
bandwidth
Mid1
frequency
Offset
page
Mid2
bandwidth
Mid2
frequency
2014/04/22
8:48:52
Advertisement
Table of Contents
