Kawai MP11 Owner's Manual page 79

 M oving the playback position (seek)
Press the  or  recorder control buttons to rewind or fast-
forward the playing position of the audio file .
* The playback position can be moved both before and during playback.
6. Stopping audio file playback
While an audio file is playing:
Press the / recorder control button.
The LED indicator for the / button will turn OFF, and audio
file playback will stop.
Press the / button again to continue playback from the
stopped position, or the   button to reset the playback
position to the beginning of the audio file.
* The F4 function button (STOP) can also be used to reset audio playback.
 A -B Repeat function
The A-B Repeat function allows one section of an audio file to be
repeated continuously (looped). This function can be activated
both before and during audio file playback.
Press the A  B recorder control button once to set the start
point of the loop.
The LED indicator for the A  B button will start to flash.
Press the A  B button again to set the end point of the loop.
The LED indicator for the A  B button will turn ON and the
specified section will repeat continuously.
Press the A  B button once again to cancel the loop.
The LED indicator for the A  B button will turn OFF and normal
playback will resume.
 C hain Play mode
Chain Play mode allows all audio files stored in a folder to be played continuously, in sequence.
Press and hold the / recorder control button.
The Chain Play icon will be shown in the LCD display, and the
audio files will start to play continuously, in sequence.
MP11_EN_20140421_R102.indd 79
  button:
Reset position
End point of the loop set, loop activated
Loop deactivated, normal playback resumes
Chain Play
activated
 button:  button:
Rewind Fast-Forward
LED indicator OFF:
Playback has stopped
/ button:
Resume playback
LED indicator flashing:
Start point of the loop set
LED indicator ON:
LED indicator OFF:
LED indicator ON:
Playback is in progress

2014/04/22 8:49:10