Default Setting - Samsung SRN-473S User Manual

appendix

defAuLT SeTTing

To reset the system, move to "System management > Settings > Load factory default" and press the
<initialization> button.
This returns the factory default settings.
When you initialize the system without changing the <Authority Setting>, you must enter the ID and password to log into the
`
M
system after it reboots. The ID and password are "admin" and "4321", respectively.
Please change the password after you log in.
The default settings are based on SRN-1673S.
`
The initial administrator ID is "admin" and the password should be set when logging in for the first time.
`
Please change your password every three months to safely protect personal information and to prevent the damage of the information theft.
`
Please, take note that it's a user's responsibility for the security and any other problems caused by mismanaging a password.
Category
Date/Time/Language
System
System Management
Log Information
Device
Storage Device
162_ appendix
Details
Date/Time/Language
Admin
User
Permission Setup
System Information
System Log
Event Log
Backup Log
Cam Registration
Camera Setup
Live Setup
Camera
Channel Setup
Device/Format
Date
Time
Time Zone
Time Sync.
DST
Language
Holiday
ID
Restricted Access
Restriction on Network Access
Auto Log out
Manual Input of ID
Device Name
Log List
Log List
User
Video
Audio
Camera Name
Device
Usage
Status
Temperature
Factory Default
YYYY-MM-DD
24 hours
GMT
OFF
OFF
English
OFF
admin
Backup/Record/Record
Stop/Search/PTZ/Remote
Alarm Out/Shutdown
None
3 Min
OFF
NVR
Setup Start (Local)
Video Loss Detection
admin
OFF
OFF
OFF
ON
OFF
CAM 01 ~ CAM 16
HDD
Internal
Normal
31°C/86°F