Call block
Call block
Review the call block list
1. When the telephone base is in idle mode, press MENU
2. Press q
or p
CID
3. Press
/�ELECT again to choose Block list.
MENU
/�ELECT again to choose Review.
4. Press
MENU
5. Press q
or p
CID
entries.
NOTE: Block list is empty appears if there are no call block entries.
�ave a caller ID log entry to call block list
1. Search for the desired caller ID log entry (see Review the caller ID log on
page 70).
2. When the desired entry displays, press
3. Press q
or p
CID
4. When the screen displays EDIT NUMBER, use the dialing keys to edit
the number.
•
Press q
CID
Press X/DELETE on the telephone base to backspace and erase a digit.
•
•
Press and hold X/DELETE on the telephone base to erase the
entire entry.
•
Press and hold
(a p appears).
/�ELECT to move on to the name.
5. Press
MENU
6. When the screen displays EDIT NAME, use the dialing keys to edit the name.
Press q
•
CID
•
Press 0 to add a space.
Press X/DELETE on the telephone base to erase a character.
•
•
Press and hold X/DELETE on the telephone base to erase all characters.
•
Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press #
(pound key).
/�ELECT when done. The screen shows �aved.
7. Press
MENU
to scroll to Call block, then press
DIR
to browse through the call block
DIR
to scroll to Call block, then press
DIR
or p
to move the cursor to the left or right.
DIR
/�AU�E to insert a three-second dialing pause
REDIAL
or p
to move the cursor to the left or right.
DIR
/�ELECT.
MENU
78
.
/�ELECT
/�ELECT.
MENU
>Review
Add new entry
p
q
/�ELECT.
MENU