Table of Contents
Advertisement
Multiple handset use
Push-to-talk (PTT)
Using the telephone base:
1. There are a few ways to begin a PTT call to a single
handset. When the telephone base is not in use:
•
If you have one handset, press and hold �TT.
•
If you have more than one handset:
w Press �TT, then use the dialing keys to enter the
destination handset number.
-OR-
w Press q
CID
handset number, then press
The telephone base shows Connecting to HAND�ET X...
(HAND�ET represents the handset name, X represents
the destination handset number) for a few seconds. When the connection is
made, both the telephone base and destination handset display �ress and
hold [�TT] to talk.
2. Press and hold �TT. A chirp indicates your microphone
is on. Speak towards the telephone base. Your voice is
broadcast to the destination handset.
While you are speaking, the telephone base shows
�TT To handset: X.
3. Release �TT after speaking. Both devices beep once again and the screens
show �ress and hold [�TT] to talk, then you can press and hold �TT to
continue speaking or the destination device can respond (see Answer a
�TT call on page 56).
4. To end the PTT call, press CANCEL. The telephone base shows
�ush to talk Ended for a few seconds.
or p
to highlight the destination
DIR
/�ELECT or �TT.
MENU
53
PUSH TO TALK
>HANDSET
X
p
q
Connecting to
HANDSET X...
Press and hold
[PTT] to talk
PTT To
handset: X
Advertisement
Table of Contents
