Table of Contents
Advertisement
Multiple handset use
Intercom
Use the intercom feature for conversations between two handsets, a handset
and the telephone base, or a handset/telephone base and a cordless
headset/speakerphone (sold separately). You can buy additional expansion
handsets (model AT&T CL80115), cordless headsets and speakerphones for
this telephone base to expand your telephone system (up to 12 handsets or
10 cordless handsets and two cordless headsets/speakerphones).
Using a cordless handset:
1. Press MENU/
Press q
or p
CID
/�ELECT.
MENU
•
If you have one handset and no other registered
devices, the handset shows Calling base.
•
If you have cordless headset(s)/speakerphone(s) or more
than one handset, the handset shows INTERCOM TO:
Use the dialing keys to e e nter a specific device number
(0 for the telephone base, 1-9 for handsets 1-9, TONE
followed by 0-2 for handsets 10-12, # for a single
headset/speakerphone, # followed by 1 or 2 for
headset/speakerphone 1 or 2, or TONE followed by #
for all devices), or press
desired device and press
screen shows Calling HAND�ET X, Calling BA�E 0,
Calling headset or Calling all devices.
The destination device(s) rings and shows HAND�ET X is calling or
HAND�ET X is calling all (HAND�ET represents the handset name, X
represents the handset number).
2. To answer the intercom call, press �HONE/
dialing key (0-9, TONE , or # ) on the called device. Both devices now
show Intercom.
3. To end the intercom call, one party presses OFF/
handset back in the telephone base or charger; or presses CANCEL on the
telephone base. The other party hears four beeps. Both devices display
Intercom ended.
in idle mode to enter the main menu.
�ELECT
to scroll to Intercom, then press
DIR
press q
MENU
The other party hears four beeps. Both devices display
or p
to scroll to the
CID
DIR
/�ELECT. Your handset
47
/��EA�ER
��EA�ER or any
,
FLA�H
, or place the
CANCEL
Calling
Base 0
HANDSET X
is calling
Intercom
11:35
12/02
AM
Advertisement
Table of Contents
