SAGEM F@st
1. Hardware installation
To install your modem without any difficulty, please follow the steps below in number order.
1. Connect the ADSL splitters to your telephone sockets
The ADSL splitters (or filters) let you make phone calls and use your ADSL link at the same
time.
All the sockets used by a telephone device must be fitted with an ADSL splitter. This
!
device may be an analog telephone, a DECT phone, an answering machine, a fax
machine, a set-top-box decoder return channel, etc.
2. Power up your modem
1
The use of any other power supply unit will invalidate the manufacturer's warranty
TM
908 / 948 Reference Manual - Ethernet Interface
ADSL filter
For this, use the power supply unit
supplied with your modem
When the modem is powered up, the
PWR LED lights.
5
1