Encapsulation Options In Ethernet Mode (Depending On Versions) - Sagem F@st 908 Reference Manual

SAGEM F@st
At the end of the installation process, the BridgeMon diagnostics application icon,
the Uninstall icon are created in the desktop.
2.4 Encapsulation options in Ethernet mode (depending on
versions)
Depending on versions, the SAGEM F@st™ 908/948 modem supports two encapsulation
modes:
•
RFC 1483 bridge,
•
RFC 1483 router DHCP.
If your Internet connection has to be set up in PPPoE mode, you
must use RFC 1483 bridge encapsulation.
See section 3 - Connecting to the Internet.
Please refer to your Internet Access Provider (IAP) to ascertain which encapsulation mode
and Internet connection mode must be used on your ADSL line.
TM
908 / 948 Reference Manual - Ethernet Interface
11