Dhcp Connection Mode; Dhcp Connection To Pc - Sagem F@st 908 Reference Manual

SAGEM F@st
3.2

DHCP connection mode

To connect your computer (PC or Mac) operating in DHCP client mode via its Ethernet
interface to the SAGEM F@st
can be done irrespective of your computer's operating system.
Configuration entails assigning a public IP address to your computer (PC or Mac) by DHCP
request.
3.2.1

DHCP connection to PC

In Windows    XP, for example, proceed as follows:
1 •
Select Start / Connections /
Show all connections, and
the screen opposite appears.
•
Select the local connection
you want to use with the
SAGEM
then right click and select
Properties.
2
The screen opposite appears.
•
Select the General tab and
then the TCP/IP protocol, and
click the Properties button.
TM
908 / 948 Reference Manual - Ethernet Interface
TM
908 / 948, you must correctly configure the computer. This
TM
F@st 908 / 948
23