Removing And Installing Components; Removing The Stand - Dell Vostro 20–3055 Owner's Manual

Removing and Installing Components

This section provides detailed information on how to remove or install the components from your
computer.

Removing the Stand

1. Follow the procedures in
2. Place the computer on a flat surface, display facing downwards.
3. Pry and remove the hinge cover from the computer.
4. Perform the following steps as shown in the illustration:
a. Remove the screws that secure the stand to the computer [1].
b. Slide the stand from the computer [2].
6
Before Working Inside Your Computer.
2