Installing the System-Board Shield
1.
Align the system-board shield on the system board. Tighten the screws to secure it to the computer.
2.
Install:
a.
back cover
b.
optical-disk drive
c.
stand
3.
Follow the procedures in
Removing the Memory
1.
Follow the procedures in
2.
Remove:
a.
stand
b.
optical-disk drive
c.
back cover
d.
system-board shield
3.
Pry the retention clips away from the memory module until it pops-up. Lift and remove the memory
module from its connector.
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
13