Table of Contents
Advertisement
Installing the Hard Drive
1.
Place the hard-drive in the bracket.
2.
Tighten the screws that secure the hard-drive to the bracket.
3.
Slide the hard-drive into the screw holes of the display bracket.
4.
Tighten the screw that secures the hard-drive to the computer.
5.
Connect the hard-drive cable.
6.
Install:
a.
back cover
b.
optical-disk drive
c.
stand
7.
Follow the procedures in
Removing the Power-Switch Board
1.
Follow the procedures in
2.
Remove:
a.
stand
b.
optical-disk drive
c.
back cover
3.
Perform the following steps as shown in the illustration:
a. Press the locking tab that secures the power-switch to the computer [1].
b. Lift the power-switch board [2].
c. Lift the lock tab and disconnect the power switch cable from the computer [3.4].
After Working Inside Your
Before Working Inside Your
Computer.
Computer.
11
Advertisement
Table of Contents
