Table of Contents
Advertisement
3. With the final step of the on-screen installation instructions, you can choose
For information about allowing the Desktop Manager software to overwrite the
MultiPASS L90 setup options, refer to the "Overwriting the MultiPASS L90
Options" section presented earlier in this chapter.
Setting the Default Printer
When you installed the printer driver software, you had the opportunity to set the
MultiPASS L90 as the default printer. If you did not set the default printer at that
time, follow these instructions to set the MultiPASS L90 as the default printer.
To set the default printer (Windows 3.1x):
1. In Program Manager, double-click Control Panel.
2. In Control Panel, double-click Printers.
3. In the Printers dialog box, under Installed Printers, click Canon
4. Click Set As Default Printer. Then click Close.
To set the default printer (Windows 95):
1. On the Windows desktop, click Start, and then point to Settings.
2. On the Settings menu, click Printers.
3. In the Printers dialog box, click the Canon MultiPASS L90 Printer icon.
4. On the File menu, click Set As Default.
2-10
Installing the Desktop Manager Software
to start the MultiPASS Background automatically, enabling your computer to
communicate with your MultiPASS L90
MultiPASS L90 Printer.
Chapter 2
Advertisement
Table of Contents
