Toshiba RAS-18UFHP-E Service Manual page 74

No. Part name
5
Refrigeration
assembly
6
Multiblade fan
and Fan motor
Procedures
<How to remove the Refrigeration assembly>
1) Remove the Air inlet grille, the Front panel
and the Drain pan assembly. (1, 2, 3)
2) Stop the gas at the Outdoor unit.
3) Remove 2 pipes from the Refrigeration
assembly.
4) Remove the TC sensor from holder.
5) Remove the pipe holder.
6) Remove the earth wire.
7) Remove 2 screws and remove the
refrigeration assembly with pushing it to
right hand.
<How to remove the Multiblade fan and
Fan motor>
1) Remove the Air inlet grille and the Front
panel. (1, 2)
2) Disconnect 2 connectors.
3) Remove the Fan covers.
4) Remove the Motor band with holding the
Fan motor and then remove the Fan motor
with the Multi-blade fans.
5) Unfasten the Set-screw and remove the
Multi-blade fans.
Motor band
– 73 –
FILE NO. SVM-02008
Remarks
Earth wire TC sensor
Pipe holder
2 Screws
Fan cover
Motor 2 Connectors
Multi-blade fan