Toshiba RAS-18UFHP-E Service Manual page 41

8-4-4. Under ceiling installation
For the installation of the indoor unit, use the Paper
pattern, which is inside the package box cover.
<Install the Suspension bolts>
• Install the suspension bolts so that it can support
the indoor unit.
240 mm or more
Fig. 8-4-7
• Adjust distance to ceiling before installation.
Suspension
bolt
Washer
Spring
washer
Fig. 8-4-8
1093
1015
140
Nut (M10)
Spring
washer
Suspension
bolt (M10)
Washer
Nut (M10)
<Install the indoor unit>
1. Remove the Side covers and the Installation plate
1.
2. Insert the Suspension bolts into the metal fittings of
the indoor unit.
3. Set to nuts, spring washers and washers on both
sides of the metal fittings and then move the indoor
unit backward.
4. Secure it with the M10 Nuts. (4pcs)
5. Attach the Side covers to the unit.
Suspension bolt
Side cover
4
Nut (M10)
<Condition for installation>
• The unit must not decline more than 15 mm in either
axis.
15 mm
15 mm
– 40 –
FILE NO. SVM-02008
1 Installation plate 1 1 1 1
Suspension bolt
2
Side cover
Fig. 8-4-9
Fig. 8-4-10