Toshiba RAS-18UFHP-E Service Manual page 73

No. Part name
3
Drain pan
assembly
4
Electrical parts
assembly
Procedures
7) Remove 7 screws and remove the Drain
pan assembly.
<How to remove the Electrical parts assembly>
1) Remove the Air inlet grille, the Front panel
and the Drain pan assembly. (1, 2, 3)
2) Remove the Terminal cover.
3) Unfasten the screw of Cord clamp and
disconnect the connecting cable.
4) Remove the Connector cover and
disconnect the Fan motor cords.
5) Remove the TC sensor and earth wire from
Refrigeration assembly.
6) Remove the Electrical parts assembly.
NOTE : When install the electrical parts
assembly, fix the screw after the Back body
is fixed.
Screw
Connecting
cable
Electrical parts
assembly
(Continue)
– 72 –
FILE NO. SVM-02008
Remarks
Screw
Drain Pan
Terminal cover
Connector cover
Refrigeration
TC sensor
assembly
Earth wire
Cord clamp
Fan motor cords