Toshiba RAS-18UFHP-E Service Manual page 40

8-4-2. Before installation
<Remove the Air inlet grille>
1. Open the Air inlet grille with both hands.
2. Loosen three screws for fixing the Panel arm.
Do not remove the screws at this time.
1
1
Fig. 8-4-3
3. First, move the Air inlet grille upward, then turn it
backwards.
4. Remove the Grille stopper from the axis of the Front
panel. After that, remove the Air inlet grille
5. Remove the Panel arms from the Front panel.
3
Grille stopper
3
Fig. 8-4-4
2
2
Screw
Panel
arm
Panel arm
5
– 39 –
8-4-3. After installation
<Install the Air inlet grille>
1. Insert the three Panel arms on the Air inlet grille and
fix each securely by screws.
Fig. 8-4-5
CAUTION
• The screws that fixed with Panel arms must not
be loose.
2. Set the Air inlet grille arm to the axis of the Front
panel.
3. Insert the Grille stopper to the correct position and
fix it securely with screws.
4. Push the Air inlet grille to the correct position.
Axis of the
Air inlet
Front panel
grille arm
Fig. 8-4-6
FILE NO. SVM-02008
Panel arm
Rib