Toshiba e-STUDIO5540C Scanning Manual page 30

2 BASIC OPERATION
 XPS files are supported only by the following models and operating systems:
Models:
- e-STUDIO6570C Series
- e-STUDIO6550C Series
- e-STUDIO4540C Series
- e-STUDIO507 Series
- e-STUDIO456 Series
- e-STUDIO857 Series
- e-STUDIO856 Series
- e-STUDIO2550C Series (only when the hard disk is installed)
- e-STUDIO5055C Series
- e-STUDIO307LP
- e-STUDIO306LP
Operating systems:
- Windows Vista
- Windows 7
- Windows 8
- Windows Server 2008 SP1 or later versions
- Windows Server 2012
- Windows Server 2003 SP1 or later versions with .NET Framework 3.0 installed
 If the forced encryption setting is enabled, PDF is the only available file format. To learn more
about the forced encryption setting, refer to the MFP Management Guide.
 MULTI/SINGLE PAGE
[MULTI] — Press this button to store your scan as a multiple page file. When you scan several pages,
the equipment stores all the pages as a single file.
[SINGLE] — Press this button to store your scan as a single file for each page. When you scan several
pages, the equipment stores each page as a separate file.
 SECURITY
When PDF is selected for the file format, you can decide whether or not to encrypt the PDF file. To
encrypt the PDF file, press [ON]. For further instructions on how to encrypt PDF files, see the following
section:
 P.82 "Encrypting PDF Files"
10
Press [SCAN].
28 Scan to File