Toshiba e-STUDIO5540C Scanning Manual page 27

2.BASIC OPERATION
6
Select the desired file destination from the list.
1) Select the file destination.
2) Press [OK].
 If FTP, NetWare IPX, NetWare IP or FTPS is selected for the file destination, proceed to Step 9.
 If SMB is selected for the file destination, proceed to Step 7.
 If your desired file destination has not been registered in the equipment, press [DIRECT INPUT] and
proceed to Step 8.
7
If SMB is selected for the file destination, select the folder to be stored.
1) Select the folder to be stored.
2) Press [OK].
Proceed to Step 9.
8
Select a folder for the remote destination.
1) Select FTP, SMB, NetWare IPX, NetWare IP, or FTPS as a protocol to transfer the file.
2) Press [SERVER NAME], [NETWORK PATH], [LOGIN USER NAME], [PASSWORD] and/or
[COMMAND PORT] and specify the file destination.
3) Finally, press [OK].
2 BASIC OPERATION
Scan to File 25