Cable The Devices And Connect Power; Check The Status - NETGEAR ProSAFE GSS108E User Manual

Cable the Devices and Connect Power

Computer
GSS108E Switch
Figure 6. Switch connected to devices and power

Check the Status

Status LEDs are located on the front of the switch. When the switch is powered on, the Power
LED lights solid green. The following table describes how the port LEDs work.
Table 1. Port LEDs
Left LED Right LED
Solid green Off
Off Solid green 10/100 Mbps link
Blinking Off
green
Off Blinking
green
Off Off
ProSAFE 8-Port and 16-Port Gigabit Click Switch
Server
Optional router
Status
1000 Mbps link
1000 Mbps activity
10/100 Mbps activity
No link (off)
Hardware Setup
10
Internet
Optional modem