Mount The Switch On A Table Leg Or Pole; Cable The Devices And Connect Power - NETGEAR GSS108E Hardware Installation Manual

ProSAFE 8-Port and 16-Port Gigabit Web Managed Click Switch

Mount the Switch on a Table Leg or Pole


To table-mount the switch:
1. Peel the plastic cover off the adhesive squares on the rear of the backplate.
The adhesive helps hold the backplate in place when you are mounting the switch.
2. Mount the backplate on a table leg using the cable retention straps.
3. Use a horizontal side mount for the switch.

Cable the Devices and Connect Power

Computer
GSS108E Switch
Figure 8. Switch connected to devices and power
Server
Optional router
Installation
15
Internet
Optional modem