NETGEAR ProSAFE GSS108E User Manual page 51

Hide thumbs Also See for ProSAFE GSS108E:

Table of Contents

Use an Ethernet cable to connect your computer to an Ethernet port on the switch.

Launch a web browser.

In the address field of the browser, enter the IP address of the switch.

You can find the IP address of the switch by using the ProSAFE Plus utility or get it from

the DHCP server. If the switch cannot get an IP address from a DHCP server, enter

192.168.0.239.

You are asked to enter the password for the switch.

Enter the switch's password in the password field.

The switch's default password is password.

The Switch Information screen displays.

Select VLAN > 802.1Q > Advanced > VLAN Membership.

Select the ports.

Select Tagging Control or UnTag Tagging Control.

Click the Apply button

Your settings are saved.

ProSAFE 8-Port and 16-Port Gigabit Click Switch

Use VLANS for Traffic Segmentation

Table of Contents

Prosafe gss116e