Use Browser-Based Access To Assign Ports To Multiple Vlan Groups - NETGEAR ProSAFE GSS108E User Manual

If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Status screen displays.
6. Select VLAN > Port Based > Advanced.
The Advanced Port-Based VLAN screen displays.
7. Select the Enable radio button.
A message displays asking if you want to delete the previous VLAN settings.
8. Click the Yes button.
The Advanced Port-Based VLAN Configuration screen displays.
9. Select a VLAN ID from the VLAN identifier menu and select the ports that you want to add
to the VLAN.
10. Click the APPLY button.
Your settings are saved.
To create more VLANs, repeat these steps with another VLAN ID.
Use Browser-Based Access to Assign Ports to Multiple VLAN
Groups

To assign ports to multiple VLAN groups in a port-based VLAN:
1. Set up your computer to use an IP address in the same subnet as the IP address of the
switch.
2. Use an Ethernet cable to connect your computer to an Ethernet port on the switch.
3. Launch a web browser.
4. In the address field of the browser, enter the IP address of the switch.
You can find the IP address of the switch by using the ProSAFE Plus utility or get it from
the DHCP server. If the switch cannot get an IP address from a DHCP server, enter
192.168.0.239.
You are asked to enter the password for the switch.
5. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information screen displays.
6. Select VLAN > Port Based > Advanced.
ProSAFE 8-Port and 16-Port Gigabit Click Switch
Use VLANS for Traffic Segmentation
42