Minimum clearance from left edge of cutout to nearest combustible surface
B
Minimum clearance from right edge of cutout to nearest combustible surface
C
Minimum clearance from rear edge of cutout to:
Nearest combustible surface
Nearest non-combustible surface
D
Minimum height of non-combustible material when used on adjacent walls
E
Minimum clearance from cooktop surface to:
Rangehood
Any other overhead exhaust fan
Downward facing combustible surface
Downwards-facing tiled or fire resistant surface
F
Minimum clearance below top of benchtop to:
Combustible surface
Fisher & paykel oven or nearest non-combustible surface
G
Minimum distance from right edge of cooktop to gas connection point on wall (if using a flexible hose)
H
Distance from floor to gas connection point on wall (if using a flexible hose)
I
Maximum overall depth of overhead cabinetry
Note: Ensure there is an earthed power outlet within 900 mm of the centre rear of the product. The gas connector on the wall should be 800-850 mm (H) above the floor and to a distance of at least 250 mm (G) outside
the width of the product, on the right-hand side. It should be accessible with the product installed.