Off" Is Displayed At The Vitotronic 200; Is Displayed At The Vitotronic 200; E" Is Displayed At The Vitotronic 200 - Viessmann Vitotronic 200 Operating Instructions Manual
Vitodens 200-w, b2ha
models 45 to 150
wall-mounted, gas-fired condensing boiler in conjunction
with the vitotronic 300-k mw2c cascade control
for operation with natural gas and liquid propane gas
heating input 55 to 530 mbh
16 to 150 kw
read and s
Hide thumbs
Also See for Vitotronic 200:
- Service instructions manual (336 pages) ,
- Installation and service instructions for contractors (136 pages) ,
- Installation and service instructions manual (132 pages)
Table of Contents
Advertisement
Vitotronic 200 Operating
"OFF" is Displayed at the Vitotronic 200
Cause
The heating program is enabled or the boiler is shut
down externally.
" " is Displayed at the Vitotronic 200
Cause
The time for a service, as specified by your heating
contractor, has arrived.
"
" is Displayed at the Vitotronic 200
Cause
Heating system fault.
"E" is Displayed at the Vitotronic 200
Cause
A limit temperature has been reached.
Remedy
Set the heating program
If necessary, notify your heating contractor.
Remedy
Proceed as described on page 16.
Remedy
Proceed as described on page 16.
Remedy
Press "R" (see chapter "Controls").
Acknowledge the fault message with OK.
Notify your heating contractor of the fault code if the
fault reoccurs.
Troubleshooting
.
17
Hide quick links:
Advertisement
Table of Contents
