Vitotronic 200 Operating
"OFF" is Displayed at the Vitotronic 200
Cause
The heating program is enabled or the boiler is shut
down externally.
" " is Displayed at the Vitotronic 200
Cause
The time for a service, as specified by your heating
contractor, has arrived.
"
" is Displayed at the Vitotronic 200
Cause
Heating system fault.
"E" is Displayed at the Vitotronic 200
Cause
A limit temperature has been reached.
Remedy
Set the heating program
If necessary, notify your heating contractor.
Remedy
Proceed as described on page 16.
Remedy
Proceed as described on page 16.
Remedy
Press "R" (see chapter "Controls").
Acknowledge the fault message with OK.
Notify your heating contractor of the fault code if the
fault reoccurs.
Troubleshooting
.
17