Enable Wi-Fi Setting; Select Wireless Configuration Method; Pbc (Wps) Method - Ricoh SP 311SFNw Getting Started Manual

Enable Wi-Fi Setting

Before continuing, ensure that the printer's Wi-Fi function is enabled, as follows:
1. If a network (Ethernet) cable is connected to the printer, disconnect.
Important:
The printer cannot connect to a network cable (wired) and wireless LAN simultaneously.
•
2. Press [User Tools].
3. Scroll down [] to [Network Settings], and press [OK].
4. Select [Wi-Fi], and press [OK].
5. Select [Wi-Fi Enable], and press [OK].
6. If necessary, select [Enable], and press [OK].
7. To exit, press [Clear/Stop].
Display reads, Please Restart Machine.
8. Turn printer power switch Off. Wait a moment, and then turn On.

Select Wireless Configuration Method

PBC (WPS) Method

PBC (WPS) Method
Again, this method is recommended when your router has a WPS button. When
using this method, optimum security for the devices is automatically configured,
based on the connection environment. As such, it cannot be assumed that the
configured security setting is the most secure.
To connect using the PBC Method, proceed as follows:
1. Press [User Tools].
2. Scroll down [] to [Network Settings], and press [OK].
3. Select [Wi-Fi], and press [OK].
4. Select [WPS], and press [OK].
5. Select [PBC], and press [OK].
Display reads, "WPS PBC Connect?"
6. Press [Yes].
Display reads, Please push the [AP] within 2 minutes (WPS button on the router). Display then
reads, PBC Executing....
7. When display reads, Connection to AP has Succeeded, press [Exit]  [User Tools].
Note:
If the connection fails, Connection to AP has Failed appears on the display, press [Exit]. Repeat
•
from step 1, and make sure to firmly press the WPS button on the router after step 6. If the
problem persists, contact 1-800-RICOH38 (742-6438), option #1.
8. Turn printer power switch Off. Wait a moment, and then turn On.
RICOH SP 311SFNw B&W Multifunction Laser Printer
PIN Method
Getting Started Guide
Manual Method
11