Troubleshooting - Fujitsu SE700 Operating Manual

Rack console

Troubleshooting

No image is displayed on the monitor:
Symptom
The power LED is out.
The power LED is orange. Or,
when the MENU/SELECT button
is pressed, the message "Signal
Going to Sleep" is displayed.
The power LED lights but no image
is displayed on the monitor.
The screen flickers.
The monitor display looks strange:
Symptom
Grid screen that flickers.
Vertical stripes are visible.
Sometimes no images are
displayed on the monitor.
Letter weights are different across
the monitor.
Monitor cannot be adjusted:
Symptom
Automatic adjustment using the
AUTO/EXIT button does not work
and the following message is not
displayed:
"AUTO Processing"
40
Cause
The power is not turned on.
The monitor does not function
correctly after being turned on.
The server is in standby mode.
The monitor is incorrectly
connected to the server.
The rack console was turned
on after the server was turned
on.
The monitor is incorrectly
connected to the server.
The monitor is incorrectly
connected to the server.
Cause
The monitor is unfocused.
Monitor adjustment is not
correct.
The monitor is incorrectly
connected to the server.
Focus or clock adjustment is
not correct.
Cause
Automatic adjustment was
performed with an extremely
dark monitor
background/image.
Controls
Action
Press the power button.
Notify Customer Support.
Notify Customer Support.
Turn on the device at the same
time as or before you turn on
the server.
Notify Customer Support.
Notify Customer Support.
Action
Adjust the focus of the monitor.
Adjust the clock, and then
adjust the display position.
Notify Customer Support.
Adjust the clock, and then
adjust the display position.
Action
Make the monitor image as
bright as possible, and then
press the AUTO/EXIT button
to redo automatic adjustment.
U41858-J-Z126-1-76