Switching The Se Server On - Fujitsu SE700 Operating Manual

Switching the server on and off

8.2.2 Switching the SE server on

The figure below shows the hardware involved in switching the Server Unit /390 on/off.
Administration PC
Figure 26: Hardware involved in switching the Server Unit /390 on/off
Detailed information on switching the hardware on/off using the SE Manager is provided in
the "Operation and Administration" manual [5].
The following hardware components must be switched on in the specified order.
1. Switch on the optional hardware components
Switch on the ETERNUS LT40 S2 tape library using the On/Off switch at the front (see
Ê
the "Additive Components" Operating Manual [4]).
Switch on any other connected hardware components.
Ê
U41858-J-Z126-1-76
https://<se server>
Switching the SE700 / SE500 on and off
SE Server SE700 / SE500
Administration LAN
Management Unit
local console
SU /390
FST access
Power on/off
USB1
USB2
USB
relay
73