Objective And Target Groups Of This Manual - Fujitsu SE700 Operating Manual

Objective and target groups of this manual

1.2 Objective and target groups of this manual
The SE700 / SE500 / SE300 Operating Manual, which consists of a number of modules,
describes the features and hardware components of the FUJITSU Server BS2000 of the
SE Series. Users should read this manual carefully in order to obtain optimal performance
from the SE server.
Readers require a knowledge of BS2000 system operation and administration as well as
basic knowledge of Linux. In some places knowledge of X2000 is helpful. This can be
obtained from the "Operation and Administration" manual [5].
This manual is intended for people who operate an SE server:
As administrator you manage the entire SE server with all its components and the
●
operating systems which run on it. You need a good knowledge of the BS2000, Linux
and Windows operating systems and of the network and peripherals.
As administrator you can also manage the integration of the optional Application Units
on which an open operating system runs in Native or virtualized mode (e.g. under
VMware).
As operator you operate BS2000 on the Server Unit of the SE server. You need a good
●
knowledge of the BS2000 operating system and also of the connected peripherals.
As XenVM administrator you operate the virtual machines and their devices for Linux
●
and Windows guest systems on the Server Unit x86 of the SE server. You need a good
knowledge of the Linux and Windows operating systems and also of the connected
peripherals.
10
Introduction
U41858-J-Z126-1-76