Switching The Se Server Off - Fujitsu SE700 Operating Manual

Server bs2000
Hide thumbs Also See for SE700:
Table of Contents

Advertisement

Switching the SE700 / SE500 on and off

8.2.3 Switching the SE server off

Figure
figure 26 on page 73
on/off.
The following hardware components must be switched off in the specified order.
v
1. Switch off the optional Application Units
Before the Application Unit is switched off, the power-on indicator lights up green.
Terminate the customer applications and the operating system properly.
Ê
The Application Unit is switched off automatically and enters standby mode.
The status indicator lights up orange. Check this before continuing.
i
Alternatively, as the administrator you can switch the Application Unit off using the
SE Manager (menu Hardware → Server (SE<model>, Units tab, "Switch off" function),
see the "Operation and Administration" manual [5].
i
Further optional Application Units are switched off in the same way.
2. Switch off the Server Unit SU /390
As the administrator or a privileged operator, switch off the Server Unit using the
Ê
SE Manager (menu Hardware → Server (SE<model>, Units tab, "Switch off" function),
see the "Operation and Administration" manual [5].
When the Server Unit is switched off, the BS2000 system is shut down properly taking
into account the remaining runtime specified.
Before the Server Unit is switched off, the power-on indicator lights up green, and after
it has been switched off, it lights up orange. Check this before continuing.
76
CAUTION!
This does not disconnect the hardware components completely from the power
source (POWER STAND-BY). To cut the entire system off from the power source,
you must must disconnect the power distribution units from the power source
Notify Customer Support.
If the operating system does not automatically switch off the Application Unit,
hold the On/Off switch down for at least four seconds.
The controls, indicators and further on/off options for the AU are described in the
"Additive Components" Operating Manual [4].
shows the hardware involved in switching the Server Unit /390
Switching the server on and off
U41858-J-Z126-1-76

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se500Se300

Table of Contents