Menu Options; Menu - Epson 3801 User Manual

User's Guide

Menu Options

Menu

Menu Settings and Explanations
Ink Levels Displays the approximate levels of the ink cartridges and the maintenance box.
When an exclamation mark is displayed, the ink cartridge is running low on ink or the maintenance
box is nearly full.
Maintenance Print Head Nozzle
Check
Print Head
Cleaning
Print Head
Alignment
Thick Paper
Paper Guide
Cleaning
Remove Paper
Maintenance Roller
Information
Paper Setup Select the paper size and paper type you loaded in each paper source.
Printer Basics
Indicates a problem with the printer's wireless (Wi-Fi) network connection, or that the
printer is searching for a wireless (Wi-Fi) network connection.
Indicates that the printer is connected to a wireless (Wi-Fi) network in Ad Hoc mode.
Indicates that the printer is connected to a wireless (Wi-Fi) network in Wi-Fi Direct
mode.
Indicates that the printer is connected to a wireless (Wi-Fi) network in Simple AP mode.
Turns on when Eco Mode is enabled.
Prints a pattern to check if the print head nozzles are clogged.
Cleans clogged nozzles in the print head.
Adjusts the print head to improve print quality.
Run Vertical Alignment if your printouts look blurry or text and lines are
misaligned.
Run Horizontal Alignment if your printouts contain horizontal banding at
regular intervals.
Reduces ink smearing when printing. Enable this feature only when you see
ink smearing on your printouts because it may lower the printing speed. This
feature is disabled when the power is turned off.
Use this feature to feed plain paper for cleaning when there are ink stains on
the internal rollers or a paper feed problem has occurred.
Use this feature if there are still some torn pieces of paper inside the printer
even after removing jammed paper.
Displays the status of the maintenance rollers for the paper cassette in the
Maintenance Roller Status.
After replacing maintenance rollers, select Reset Maintenance Roller
Counter to reset the counter for the paper cassette in which you replaced the
maintenance rollers.
19