Troubleshooting - Epson TM-T88V-DT Easy Setup Manual

Troubleshooting

If an error occurs, the contents of the error are printed in the printing result. Refer to the
solutions below to solve the issue.
Printing result when an error
Process
During set-up SYSTEM ERROR: (4)
preparation
Setting has been aborted.
ERROR: The setting.ini contains
some incorrect format on below
items:
<Section name> - [Item name
which had the error]
Setting has been aborted.
ERROR: Authentication failed.
Setting has been aborted.
SYSTEM ERROR: (99)
Setting has been aborted.
Error other than the above
Web Service SKIPPED
Update
SUCCESS
SYSTEM ERROR: (11)
SYSTEM ERROR: (12)
ERROR: File not found.
ERROR:The installed software
version is lower than the required
version of update package.
ERROR;The installed software
version is higher than the required
version of update package.
SYSTEM ERROR: (99)
30
occurs
 Confirm access permissions for the file.
 Check the available space on the drive.
The format of the setting.ini is invalid.
Check and revise the corresponding section
of setting.ini.
Failed to verify the password for EPSON TMNet
WebConfig. Revise the password for
setting.ini.
Contact customer support for assistance.
Processing was omitted.
Processing succeeded.
Check if the update file is corrupted.
Check if the update file is corrupted.
The designated update file could not be
found.
Check and revise the contents of
AppliedLocalFile in the [WebService Update]
section of setting.ini.
The current software version for the TM-DT is
lower than the version required for the
update package you are trying to apply.
Check if the update file you are applying is
correct.
The current software version for the TM-DT is
higher than the version required for the
update package you are trying to apply.
Check if the update file you are applying is
correct.
Contact customer support for assistance.
Solution