Epson TM-T88V-DT Easy Setup Manual page 23

Section name Parameter
Restore
FileURL
UseProxy
ProxyURL
AppliedLocalFile
WebServiceUpd
ate
FileURL
UseProxy
ProxyURL
Description
Valid value
 If designating the file name (saved in the same folder of
the USB memory) which has the WebConfig settings
saved, designate the file name in AppliedLocalFile.
 If you are loading from another server, designate FileURL,
UseProxy, and ProxyURL. These items will be input in the
"Designate the file URL" item on WebConfig's [Settings]-
[Admin information]-[Save/restore settings] page. After
performing Easy Setup settings, under the set printer's
WebConfig, click the "Apply the setting file" button to
download the setting file from the designated server and
apply those settings.
Designates the URL for the file to perform the restore.
Within 255 alphanumeric characters.
 The protocol is in http or https format.
Designates whether to use a proxy server or not.
 If FileURL is not designated, this is ignored.
"Enable" / "Disable"
Designates the URL of the proxy server.
 If the value for UseProxy is "Enable", this must be set.
 If FileURL is not designated, this is ignored.
Within 255 alphanumeric characters.
 The protocol is in http or https format.
Designates the back-up file to be applied.
Designates the file in the same folder as this file (setting.ini).
Valid file name with the "dhc" extension.
This setting is for updating WebConfig using the WebService
update file. If you will not use this function, delete this item.
Designates the URL for the package that can be applied for
the WebService function update.
Within 255 alphanumeric characters.
 The protocol is in http or https format.
Designates whether to use a proxy server or not.
 This is ignored if "FileURL" is not designated.
"Enable" / "Disable"
Designates the URL of the proxy server.
 If the value for "UseProxy" is "Enable", this must be set.
 This is ignored if "FileURL" is not designated.
Within 255 alphanumeric characters.
 The protocol is in http or https format.
Chapter 2 Preparing the setting file
2
23