Saving The Additional Content - Epson TM-T88V-DT Easy Setup Manual

Section name
Networ kPrinter-
%X%

Saving the additional content

The additional contents vary depending on the environment you are constructing. Save the
necessary files for your environment on the USB memory.
 When execute Easy Setup, the existing contents are deleted, and overwritten by
 The maximum size of the files before zipping is 100 MB.
26
Parameter
Encryption- Designates the encryption method.
 If the value for "Authentication Method" is "OpenSystem",
Method
designate "None" or "WEP".
 If the value for "Authentication Method" is "SharedKey",
designate "WEP".
 If the value for "Authentication Method" is "WPA",
"WPA2", "WPAPSK", "WPA2PSK", designate "TKIP" or
"AES".
"None" / "WEP" / "TKIP" / "AES"
DefaultWEPKey Designates the WEP key in use (1 to 4).
"WEPKey1" / "WEPKey2" / "WEPKey3" / "WEPKey4"
WEPKey1 to 4 Designates the WEP key that corresponds to the WEP key
number.
 For the pass phrase, designates 5 or 13 alphanumeric
characters and symbols (excluding spaces) .
 For hexadecimals, use either 10 or 26 alphanumeric char-
acters (0 to 9, a to f, A to F).
PresharedKey Designates the pre-shared key used when using WPAPSK or
WPA2PSK.
 For the pass phrase, designate between 8 and 63 alpha-
numeric characters and symbols (excluding spaces).
Password Designates the password of the TM printer for which the
settings are to be edited.
Within 30 alphanumeric characters.
additional contents in the USB memory.
Zip the contents to be saved all together.
Description
Valid value