Epson TM-T88V-DT Easy Setup Manual page 24

Section name
WebServiceUpd
ate
NetworkPrinter-%X%
(Firmware version
2.2 or later)
24
Parameter
AppliedLocalFile Designates the update package to be applied.
Designates the file in the same folder as this file (setting.ini).
If two or more update files are specified, the update
packages are applied in the order as written.
To specify two or more update packages, list the file names
separated by a comma (,).
Valid file name with the "bin" extension.
 Change the network settings for the network-connected
TM printer.
For the network settings of this printer, write to the 
WiredNetwork section or the WirelessNetwork section.
 Enter an integer of 1or greater for %X%. (Example: Net-
workPrinter-1) Multiple printers can be registered at once
by duplicating sections in which the %X% of this section
was changed.
 To add this section to the setting.ini file, be sure to perform
kitting with the TM printer connected.
 To set wireless LAN, set all related parameters.
MACAddress Designates the MACAddress for the TM printer whose
settings will be changed. Check the status sheet of the TM
printer for the MAC address.
Use the following format.
(00~FF):(00~FF):(00~FF):(00~FF):(00~FF):(00~FF)
HostName Specifies the HostName of the TM printer for which settings
will be changed.
This setting is ignored if a MAC address is specified.
alphanumeric characters and symbols
IPAddressSetting- Designates the method for setting the IP address.
Method
"Auto" / "Manual"
APIPA Designates whether to enable / disable the APIPA.
"Enable" / "Disable"
IPAddress Designates the IP address.
 If the value for "IPAddressSettingMethod" is "Manual", this
must be set.
 If the value for "IPAddressSettingMethod" is "Auto", this is
ignored.
 Format of [numerical value 1 to 255].[numerical value 0 to
255].[numerical value 0 to 255].[numerical value 0 to 254]
 The following address(es) cannot be used.
127.0.0.1
224.0.0.0 to 239.255.255.255
240.0.0.0 to 255.255.255.255
Description
Valid value