Reset Button; Replaceable Fuse - Magnadyne M1-CD Operation And Installation Manual

Reset Button

The LCD display may fail to function normally
due to the vehicle's battery condition, and could
require resetting the radio microprocessor if:
• The vehicle has been "jump started" from a
dead battery condition.
• The vehicle battery becomes very low and is
quick-charged.
• The vehicle battery is removed and replaced.
Should any of these conditions occur, simply
press and release the RESET button on the radio
front panel using the tip of a ball point pen. This
will reset the radio microprocessor to the origi-
nal factory settings. After pressing the RESET
button, you should recheck to see if the radio
functions normally.

Replaceable Fuse

If the fuse should blow, check that the wiring is
correct. If the wiring is correct, replace the fuse
with the same amperage rating as the original
(15 amp).
EQ
DISPLAY
MODE
MUTE
AUX IN
PUSH ENT/
PUSH SEL/
BND/LOUD
MENU
5 6
3 4
1 2
VOLUME
15 Amp Fuse
TA
W-BAND
AS/PS
PTY
15
35