Magnadyne M1-CD Operation And Installation Manual page 4

Button Locations and Functions
13. Tune/Track and Loud Knob:
Radio Mode:
Manual Tuning: Rotate the TUNE knob to the left or right and hold until "MANUAL" appears in the
display, then release knob. Rotate the TUNE knob again left or right until the desired radio sta-
tion appears in the display.
Seek Tuning: Rotate the TUNE knob to the left or right and release. The tuner will scan to the next
strong station and stop.
CD and CD Changer Mode: Rotate the TUNE knob to the left or right to change the CD track on the
CD that is playing.
Loudness: Press and hold TUNE knob until "LOUD ON" appears in the display to boost high and low
tones at low volume levels. To deactivate, press and hold TUNE knob again until "LOUD OFF"
appears in the display.
14. Multi-Function Button #6:
Radio Mode: Press and hold until a beep is heard to memorize a radio station into memory #6
(CH6). Press and release when recalling preset radio station #6.
15. Multi-Function Button #5:
Radio Mode: Press and hold until a beep is heard to memorize a radio station into memory #5
(CH5). Press and release when recalling preset radio station #5.
CD Mode: Press to preview each track on the CD for 10 seconds. Press again to cancel.
CD Changer Mode: Press to preview each track on the CD for 10 seconds. Press and hold to preview
the first track on every loaded CD for 10 seconds. Press again to cancel.
16. SD Card Slot: Insert the SD card to play recorded music data.
Notes: This unit may not play all SD cards. The manufacturer of this unit is not responsible for any data
loss. Backup your data.
17. Multi-Function Button #4:
Radio Mode: Press and hold until a beep is heard to memorize a radio station into memory #4
(CH4). Press and release when recalling preset radio station #4.
CD Mode: Press to play all the tracks on the CD in random order. Press again to cancel.
CD Changer Mode: Press to play all the tracks on the CD in random order. Press and hold to play all
the CDs in random order. Press again to cancel.
18. Multi-Function Button #3:
Radio Mode: Press and hold until a beep is heard to memorize a radio station into memory #3
(CH3). Press and release when recalling preset radio station #3.
CD Mode: Press to repeat a CD track. Press again to cancel.
CD Changer Mode: Press to repeat a CD track. Press and hold to repeat the entire disc. Press again
to cancel.
19. USB Input: Plug in your USB device. "USB" will then appears in the display.
Note: This unit may not function with all MP3 players. The M1-CD will control the USB audio device.
(See "USB Operation" for more details).
20. Multi-Function Button #2:
Radio Mode: Press and hold until a beep is heard to memorize a radio station into memory #2
(CH2). Press and release when recalling preset radio station #2.
CD Changer Mode: Push to change to a higher number disc in the CD changer.
21. Audio Input Jack: Press the MODE button until "AUX FRT" appears in the display then plug
in device into the 3.5mm audio input.
Note: The M1-CD does not control the auxiliary device, it just allows the audio to be played through
the system.
22. Multi-Function Button #1:
Radio Mode: Press and hold until a beep is heard to memorize a radio station into memory #1
(CH1). Press and release when recalling preset radio station #1.
CD Changer Mode: Push to change to a lower number disc in the CD changer.
23. Reset: Press to reset the unit to it's default settings.
4
(Continued)