How To Select Sensor Settings; How To Enter Ship Speed - Furuno FAR-3210 Operator's Manual

6. CHART OVERVIEW
6.13

How to Select Sensor Settings

Sensor settings can also be selected in the chart for radar mode. Settings are mutually
changed between the radar and chart for radar modes.
This chart radar system accepts navigation data input two ways: [System] or [Local].
[System] shares sensor data among multiple chart radars in network. Sensor priority
is also commonly shared among the chart radar. [Local] selects a sensor outside the
network.
1. Right-click anywhere in the Sensor infor-
mation box to show the context-sensitive
menu.
2. Click [Local] or [System].
Note: Sensor system can also be selected
from the menu. Open the menu and click
[System/Local Select] on the [Sensor]
menu. Click the circle next to [System Sen-
sor] or [Local Sensor] then click the [Save]
button.
6.14

How to Enter Ship Speed

Speed can also be entered in the chart for radar mode. Settings are mutually changed
between the radar and chart for radar modes.
The speed can be entered from a log (STW) or GPS (SOG), or manually on the menu.
Note that FURUNO GPS Navigator GP-150 provides both COG and SOG.
Speed data is checked for integrity (see section 16.7 for details), and the data is
judged as [Passed], [Doubtful], [Failed], [Excluded] or [Not Available]. The results of
the check appear on the [SPD] page, shown below.
6-22
Open MENU