How To Turn Nav Data On/Off - Furuno FAR-3210 Operator's Manual

2.28.3

How to turn NAV data on/off

Wind, depth, ocean current and water temperature may be
set up as follows:
1. Open the menu then select [4 INFORMATION BOX].
2. Select [2 SET NAV DATA].
3. Set up the nav data referring to the table below.
[1 DEPTH]
[2 DEPTH GRAPH SCALE] Selects depth scale range. The depth for the last 30 min-
[3 DEPTH MARK]
[4 CURRENT]
[5 WIND]
[6 WIND STAB]
[7 TEMPERATURE]
Note: Appropriate sensors are required to display any data. The wind vector
shows a direction from which the wind blows in, relative to own ship heading, and
is labeled "T *". Wind velocity is a true wind speed as a result of compensating for
own ship's speed and orientation. Ocean current (tide) is shown relative to bow in
head-up, cursor gyro and course-up, and reference to North in north-up and true
motion.
4. Close the menu.
Item
Selects the unit of depth measurement, or turn depth indi-
cation off.
utes is plotted with a yellow line. The [Auto] setting auto-
matically adjusts the scale according to depth.
Selects the depth at which to show the depth mark.
Turns the current (tide) display on (current relative to
North) or off.
Selects the unit of wind speed measurement.
Selects Wind vector format, among three choices:
[APPARENT]: Apparent wind measured by wind meter,
with ship's bow as reference.
[NORTH]: Apparent wind minus ship's movement, with
North as reference.
[THEORETICAL]: Apparent wind minus ship's movement,
with ship's bow as reference.
Selects the unit of water temperature measurement, or
turns water temperature indication off.
2. RADAR, CHART RADAR OPERATION
Description
2-41