Alert List; Changing Priority Of Primary Alerts - Furuno FAR-3210 Operator's Manual

2.37.2

Alert list

The [Alert List] displays the status of the latest 900 system alerts, in order of genera-
tion, latest to the earliest. To display the list, click the Alert list/log icon in the [Alert]
box. The Alert list/log icon is light-blue when the list is displayed. A maximum of nine
alerts are shown per page. Unacknowledged alerts are displayed in flashing red
(alarm) or flashing yellow-orange (warning). The ZDA sentence is required to display
time in the list.
How to acknowledge or rectify from the list
Control Unit: Press appropriate numeric key.
Trackball module: Click alarm name.
How to find details about an alert
Click the status icon in the list to show details about an
alert.
2.37.3

Changing priority of primary alerts

Alerts are categorized and prioritized as shown below.
Priority
High
Middle
Low
If desired, you can specify the events that are to have the same priority as "Alarm".
1. Open the menu then select the [8 INITIAL SETTINGS] and [4 ALERT] menus.
• Click to close list. (Press ← on the
• [BACK] shown when there are two
The name of the alert not
acknowledged or not rectified.
Status icon
Switch to next page in multiple page
displays. (Not shown when only one
page exists.)
Alert category
Alarm
Warning
Caution
2. RADAR, CHART RADAR OPERATION
Click to close list.
Control Unit to close list.)
or more pages. Switch to previous
page in multiple page displays.
Alert Number : 255
Source: No. 2 Chart Radar
Description: Gyro 1 COM Error
Detail : Gyro 1 COM Error
2-57