How To Interpret The Alert Box; Alert Descriptions - Furuno FAR-1513-BB Operator's Manual

1.50

How to Interpret the ALERT Box

When an alert condition is found, the applicable alert message appears in the [ALERT]
box. A buzzer sounds for alarm and warning alerts. The [ALERT] box is composed of
three lines of information, and two icons, as shown below.
Alert icon
Status indications appear here
Silence the buzzer with the ALERT ACK key or select the [ALERT] box then press the
left button. The buzzer and the flashing stop but the alert indication remains on the
display until the reason for the alert is removed.
Status indications are displayed in yellow text. The displayable indications are listed
in the table below.
Status indication
AUTO VIDEO ADJ
PM
SART
TUNE INITIALIZE
VIRTUAL AIS ATON:OFF
WR CARD DATA
RD CARD DATA
DELETE CARD DATA
1.50.1

Alert descriptions

Alerts which can appear on this radar are listed in the table. The level of priority, from
highest to lowest, is ALARM
garding specific alerts and alert codes, including possible remedies, see "ALERT
CODES, MESSAGES AND MEANINGS" on page AP-10.
Note: All active-unacknowledged warnings are repeated as warnings after 60 sec-
onds (manufacturer's fixed time period).
Alert title
Reason for display
Video adjust ([VIDEO ADJ]) is set to [AUTO].
Performance Monitor (PM) is ON.
SART is ON.
TUNE INITIALIZE is ON.
[AIS VIRTUAL ATON] is OFF.
Writing data to SD-card.
Reading data from SD-card.
Deleting data from SD-card.
WARNING CAUTION. For detailed information re-
1. OPERATIONAL OVERVIEW
Buzzer silence
icon
Alert description
1-73