Deleting An Object; Creating A Series Of Labels - Dymo XTL 300 User Manual

You can add a barcode to the following label types: general, flag, heat-shrink
tube, and laminated cable wrap. If a barcode already exists on a template, the
barcode can be edited.
By default the barcode text appears below the barcode. You can choose to show
the text above the barcode or hide the text. Optionally, you can add text before
and after the barcode. Showing barcode text is not available for PDF 417 and QR
codes.
QR codes can contain the following information:
 Text only
 Phone number
 Email
 SMS text message
 Web page URL
To add a barcode
From the edit screen, select
1
Select the barcode type.
2
Enter the barcode data.
3
Use the navigation keys to set the barcode location on the label.
4
Select the barcode size and alignment.
5
To change the barcode text position
Select the barcode and press
1
Select Barcode text.
2
Make sure the Show barcode text
3
check box is selected.
Select one of the following:
4
• Text above barcode
• Text below barcode
To edit a barcode
Select the barcode and press
1
Select the property you wish to change.
2
Change the settings and press
3
When finished editing properties, select Close.
4

Deleting an Object

You must have at least one object on a label.
To delete an object
 Select the object and press

Creating a Series of Labels

You can quickly create a series of labels using the serialization feature.
To create a series, you:
®
29 XTL 300
User Guide
and then select Barcode.
.
.
.
.